Hyundai Forums banner

getz wont start after cltch replacement

1K views 3 replies 3 participants last post by  Montego 
#1 ·
Checked the fuses all looks ok,alarm seems to be working ,car cranks but wont start,any idea guys?
 
#2 ·
you need to retrace your steps when fitting the gearbox...it sounds as though you have left a wiring multiplug undone or you have inadvertently disturbed some wiring or another multiplug when raising or lowering the engine............check all wiring connections under the hood
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top