Hi guys just wondered if anyone has replaced the servo on one of these and if it is difficult, had a quick look and I was wondering if you have to disconnetc the brake pipes or you can just remove the servo from the bulkhead and then remove the master cylinder without losing brake fluid/pressure.
I hope the dealer will replace under warranty but hey you never know.
 |
|
|
3 |
gjp |
417 |
29th November 2007 - 03:24 PM Last post by: byronguidry3732 |
I have recently passed my driving test but out on the road i cant stand listening to the radio and wish to replace my poor factory fitted system with something a little bit more useful (CD/MP3/RADIO). however i am struggling to work out how i would remove the factory fitted system as it seems to be stuck fast!!! Any help with this problem would be extremely appreciated...
 |
 |
|
5 |
blade321 |
1,454 |
24th November 2007 - 09:01 AM Last post by: Debs |
Hi
I want to install a new radio but I cant get the old radio out as it sits behind the panel which needs to be removed. The old radio is slightly wider then the opening. I have tried removing the screw just under the ashtray, this loosens panel but not enough as the heater knobs and dial are in the way. Does anyone know how to go about it or would I need to get it done...
 |
|
|
0 |
Debs |
417 |
24th November 2007 - 08:54 AM Last post by: Debs |
I have a 1998 atoz and after problems with the semi automatic clutch i wish to convert it to manuel. I am told this is simple to do, but i wonder how you isolate the electrics/electronics. Has anyone done this and if so how?
Please Help! otherwise the car is scrap.
Regards Alan.
 |
|
|
1 |
mygirlsarefab |
422 |
20th November 2007 - 03:48 PM Last post by: montego |
Hi All !!
Anyone have any idea of how to remove window winder and door trim from the rear passengers door ???. This door doesnt lock/open with the central locking ...
Thanks default/beer.gif' 'beer.gif' />
 |
|
|
0 |
didge |
412 |
12th November 2007 - 02:37 PM Last post by: didge |
Hi,
I would like to add a remote door lock to my ATOS which have a central lock but without a remote.
I buy a VELLEMAN VM109 (http://velleman.be/fr/fr/product/view/?id=352746) and i could not find the way to connect this module to the original door lock switch of my car which have 4 wires.
Please HELP with electrical diagram or anything else to solve my Pb.
 |
|
|
0 |
bajou69 |
310 |
11th November 2007 - 05:56 PM Last post by: bajou69 |
Brought an atoz as an inexpensive runabout 2 years ago and it's been anything but in the past year. It is now at the point where I don't want to drive it with my kids in the car as it's just not safe as it can stall anywhere.
Our latest problem that the garage is having problems with is that you'll be driving along quite happily and then the engine will make a clicking...
 |
|
|
1 |
thewrens |
499 |
4th November 2007 - 10:20 AM Last post by: Chris9998 |
Guys,
Anyone know the power output for the Atoz radio cassette (4 speakers).
Also what size of speakers i ned to but to fit in the existing mounts.
Many thanks.
default/liebe011.gif' 'liebe011.gif' />
 |
|
|
1 |
flybynight200000 |
495 |
4th November 2007 - 07:37 AM Last post by: joko |
[FONT=Arial] [SIZE=7][COLOR=blue] hiiiiiiiii, i`m asking about how to remove the
instrument cluster of my hyundai atos 98, i want to clean it up, becuase dust
reduced the inlumination, is there anybody that can help me????????
thanks
 |
|
|
1 |
waeliano |
670 |
3rd November 2007 - 12:52 PM Last post by: atoz98 |
I bought An automatic atoz and havind a problem with the smoth ride. it some times mix gear and finally it only go with first gear. Now I get stuck. In our country automatic is not popular and very few mechanics can service it. Please any body advase.
 |
|
|
0 |
Bemnet |
320 |
25th October 2007 - 10:59 AM Last post by: Bemnet |
Can anyone tell me where the ECU is in a hyundai amica. I need to get mine tested. No one seems to know where it is and I'm not having much luck in finding a workshop manual for the car.
 |
 |
|
0 |
foxwise |
363 |
14th September 2007 - 03:16 AM Last post by: foxwise |
need a manual for a hyundai atoz where can i download one.
 |
|
|
0 |
stefan11 |
1,198 |
13th September 2007 - 10:12 AM Last post by: stefan11 |
Please help me. Can I replace a 1999 1000cc ATOZ engine with a later ATOZ Prime 1100cc engine. My engine in not repairable.
 |
|
|
2 |
Francois |
389 |
12th September 2007 - 09:34 PM Last post by: will |
Hi all,
I have a 99 Atoz Midas which is experiencing some major problems!
It began by struggling to pull in low gears and progressed to stalling even in 4th and 5th. Eventually it died completely and now won't start at all.
Over the course of a few months it has had: new distributer cap & rotar arm, distributer, ignition module, coil and plugs and...
 |
|
|
0 |
truffles |
320 |
6th September 2007 - 04:32 PM Last post by: truffles |
I can't find the Coolant Temperature Sensor for my ATOZ 97, who has the one in stock in asia?
 |
|
|
0 |
manguelee |
276 |
6th September 2007 - 05:35 AM Last post by: manguelee |
Okay hey guys, maybe just being rediculously stupid but how do i get into the rear light unit of a hyundai amica to change the brake light LOL.
Do i have to remove the whole unit and if so just the screws or all the other bits as well?
Every other car i've ever done was so simple compared to this! lol
Someone help me please....tar ...
 |
|
|
1 |
chrismjspencer |
572 |
28th August 2007 - 11:41 AM Last post by: Shelley_The_Cat |
Hi,
I am wondering if anyone can assist me, in guiding me with the removal of the radio from my 2007 reg Hyundai Amica CDX. I have seen some instructions on the website, and have followed them exactly, but get stuck around step 5, - as the console will not pull foward any further than an inch or so.
If anyone could help with this it would be greatly appreciated as I have a...
 |
|
|
4 |
EddyCarp |
806 |
21st August 2007 - 04:24 PM Last post by: davidleeis14 |
I have recently bought Santro-2002. This is my first car with an EFI engine.
My mechanic has told me this procedure to start this car because it is EFI;
1) Take ignition key to ON position, the "Check engine" light comes on and and a noise of some motor running is heard from the engine.
2) Then after about 3 seconds this light goes off with the click of a relay and then...
 |
|
|
3 |
Junaid_Hassan |
727 |
18th August 2007 - 03:34 PM Last post by: ishpreet |
The front indicator lights are showing whitish, and I think that the amber coating is coming off the bulbs, as it has done on my Seat Cordoba. How can I gain access to the lamps, please? Is there a tinted varnish available to recoat them?
 |
|
|
0 |
centaur-hu |
359 |
12th August 2007 - 12:40 PM Last post by: centaur-hu |
I have recently purchased a 2000 Amica GSI with only 23k miles. The car is spotless but has only one problem - the reversing lights are permanently on. I have removed the bulbs to mitigate this, but am guessing that the problem is with the reversing light switch which I assume must be located around the gearbox.
Can anybody out there advise me :
Where is the switch?
Is...
 |
|
Amica
Reversing Light Switch
|
0 |
David Russell |
426 |
12th June 2007 - 07:47 AM Last post by: David Russell |
3715]On April 25, 2007 my two and a half year old Hyundai Santro Xing (also known as Hyunda Amica and Hyundai Atos Atoz in some countries - the car is exported in large numbers from India) with an odometer reading of just over 26,000 kilometers suddenly stopped in the middle of the road. On towing to KUN Hyundai in Mount road, Chennai (Madras), India I was told that the crankshaft...
 |
|
|
6 |
Murugan |
1,073 |
28th May 2007 - 03:35 PM Last post by: Murugan |
default/460.gif' '460.gif' /> Ive recently bought an 98 atoz as a second car, it was a great bargain but the back grey plasctic bumber has faided. Does anyone know a good way to revive its colour?
 |
|
|
1 |
Tasha_nasha |
741 |
12th May 2007 - 11:05 PM Last post by: argillo |
Having great difficulty finding a radio fascia panal to suit a year 2000 atoz, so as I can fit a standard off the shelf Radio/CD instead of the basic non CD version that the car had fitted. Any ideas?
 |
|
|
2 |
Weldman1 |
1,104 |
2nd May 2007 - 02:36 AM Last post by: Tasha_nasha |
I really am hateing Hyundai right now the smarter people in my family have very reliable Mazdas. with millage in the 212,000 to 348,000 range none have needed major repairs! My bros wife bought this P.O.S. Atos and the rocker arm has broke in half can you say 2 cylinders? No luck finding a new head so I am forced to weld the $"%/ thing. The valves lash is way off on the #1 and 3...
 |
|
|
0 |
invaderzim! |
574 |
20th April 2007 - 08:54 PM Last post by: invaderzim! |
I need intake and exhaust valve gaps (valvelash)for a 2001 atoz 1.0 litre thank you I am in mexico and the local dodge dealer refuses to give any info.thank you for your time.
 |
|
|
2 |
invaderzim! |
558 |
20th April 2007 - 08:47 PM Last post by: invaderzim! |
hi we have a 1999 atoz the problem is we cannot get any warm air i have replaced the thermostat but it still only blows cold air has anyone any ideas
 |
|
|
2 |
houndman |
574 |
11th April 2007 - 10:44 PM Last post by: sonatalove |
Hi everyone....
I can't seem to get the air con to work in my wifes amica... When I switch on the blower/fan and press the switch in the middle...the light illuminates as it should...but...nothing. I cant hear the compressor start...nothing happens.
I have checked the fuse in the car and the one under the bonnet, they are both fine....also I have swapped the relays around...
 |
|
|
0 |
Karlos |
483 |
9th April 2007 - 12:22 PM Last post by: Karlos |
hi guys
the back passenger side door wont open on my 1999 Hyundai Atoz+
the car has central locking, it used to open but is now stuck firmly
it wont open from outside or inside
When I turn the key in the drivers door, all of the door buttons pop up but not this one
its really annoying,
a friend said if the door would open we could...
 |
|
|
1 |
DEPUTYDUKE |
519 |
4th April 2007 - 12:05 PM Last post by: montego |
Hello, the atoz is leaking again this time from the rear, when looking underneath the car I can see petrol leaking from the top left hand corner of the tank where the filler and breather pipes join. Is it possible that I have overfilled the tank or is this some thing more serious... I can't see any visible holes or cracks in the tank or pipe and at the minute the leak is a slow drip leaving a...
 |
|
|
1 |
thelittlebluebox |
449 |
2nd April 2007 - 02:48 PM Last post by: montego |
Hello Everyone!
I owned an ATOS 2002 Model Standard.
Just arriving to my office and notice that stop lights keeps turned on (three stop lights).
I started my ATOS again, turned it off but the stop lights are still on.
What can I do?
Could someone help me?
Thanks in advance.
 |
|
|
1 |
Jamiroman |
465 |
29th March 2007 - 12:22 PM Last post by: montego |
Hi guys,
I have a Hyundai Atos and I'm having problems selecting 2nd gear @ low or high rev's. What could the problem be?
The rest of the gears are fine. It's just 2nd gear.
Thanks guys
 |
|
|
1 |
nigelhope001 |
665 |
28th March 2007 - 05:40 AM Last post by: myste |
Good Day All,
I am driving a vintage 1999 Atos GLS A - and am quite contented with this small car (but with a nice high view).
Seek to establish contact with other similar-model Owners to share resources on car maintenence/repairs/ mod/ etc,...
My email is rabt7@yahoo.com
Cheers & Do Drive Safe.
 |
|
|
3 |
Rabt7 |
1,233 |
28th March 2007 - 05:34 AM Last post by: myste |
The trader promised me the owner's book, but I never got it. I got Tyre pressures and wheel nut torque from a tyre site. I haven't the service schedule. Can anyone scan it for me, please?
 |
|
|
0 |
centaur-hu |
408 |
21st March 2007 - 05:13 AM Last post by: centaur-hu |
Can any one please help me someone crashed into my car now it will turn over and not fire can anyone tell me please where the fuel cut off switch is hope you can help me asap
 |
 |
|
2 |
mistybing |
556 |
16th February 2007 - 02:31 PM Last post by: will |
Does any one know where I can find a Hyundai service manual for the Atoz mine has developed several annoying problems that need some attention, CD, Book or download any thing would be appreciated.
many thanks
bigjohn default/innocent.gif' 'innocent.gif' />
 |
|
|
0 |
thelittlebluebox |
421 |
13th February 2007 - 11:22 AM Last post by: thelittlebluebox |
Help, my house mate has just bought a 1999 atoz, it has developed an intermitent fault where the engine will judder and stall, it has done this in third, second and reverse whilst moving, this morning the car stalled completely and refused to start whilst backing into the parking space. I don't think its and electrical problem as battery is brand new. any ideas would be greatly aprecciated
 |
|
|
0 |
thelittlebluebox |
533 |
12th January 2007 - 12:30 PM Last post by: thelittlebluebox |
hi have recently had to replace the battery on my atoz, but now my radios gone on the blink, i think due to being disconnected from battery for a while, it lights up but just no sound, is there a code or and information you can give me so i can listen to the radio again while im traveling, im getting sick of singing to myself, thanks default/'...
 |
|
|
1 |
johnny153 |
492 |
29th December 2006 - 12:06 PM Last post by: montego |
Just purchased new Amica GSi done 2600 miles. Having problem with throttle control at low openings. Slow take off (as in heavy traffic) is very jerky. Car has been back too supplier three times but say nothing is wrong. Also very difficult to engage reverse gear at times (have been stuck across road whilst doing three point turn) sometimes have to stop engine, engage reverse then start engine...
 |
 |
|
1 |
Cavah |
518 |
27th December 2006 - 11:46 PM Last post by: joekewl |
how do you adjust the bite point on the semi-auto atoz clutch as this is tacking to long to engage thank you for any help cossack
 |
|
|
0 |
cossack |
570 |
24th December 2006 - 09:57 AM Last post by: cossack |
hi,yet more semi auto problems,this one is it feels like you are slipping the clutch when you change gear then it bites a few seconds latter and a bleeping noise from the dash every 6 seconds any ideas cheers cossack
 |
 |
|
2 |
cossack |
473 |
22nd December 2006 - 05:17 PM Last post by: cossack |
Hi !
The Headlight of my SANTRO Xing (ATOS) constantly Hunts at "2". I can hear the motor noise and see the beam tilt up and down. Of course it settles down after a minute or so. Does it use some kind of feedback control or what? Can any body throw some light on it?
Atanu Maity
Durgapur (WB), INDIA.
 |
|
|
1 |
atanumaity |
809 |
18th December 2006 - 02:42 PM Last post by: montego |
default/banana.gif' 'banana.gif' /> hello, i'am in mexico and own an atos prime 2002 and i'm looking for the best spark system and i wish to consider iridium sparks, but i don't find it in mexico or in the u.s. stores i have explored...... these sparks are really the real...
 |
|
|
1 |
Mojo Raisin |
479 |
17th December 2006 - 09:51 PM Last post by: joekewl |
Hello all,
I am both a newbie to this forum & a complete dunce with regards motor repairs, so apologies if this is posted in the wrong place or a stupid question.
My wife owns a 2006 (06) Amica GSI. This week a couple of electric problems have occurred:
1. The rear wiper stopped working for a couple of days, but has now started again.
2. The heater/blower...
 |
|
|
1 |
johnhill |
616 |
15th December 2006 - 03:35 PM Last post by: montego |
Last winter my atos developed this problem of the engine revving very high on a cold start. I had the car at the service agents who replaced a faulty map sensor. (saying this I am not entirely convinced the fault has gone away, I will have to see what happens this winter.) Eversince this the car has been heavy on fuel. I had it back with them a few times but their diagnostic machine says all is...
 |
 |
|
1 |
Bluebird |
1,064 |
9th December 2006 - 10:47 AM Last post by: TMK77 |
I need advice on how to change an Atoz horn unit.
Hyundai have quoted me nearly £100 though he said that I could buy a generic horn unit and wire it up myself.
Does anyone know what part number this would be in the UK?
 |
|
|
4 |
dbfcs |
568 |
8th December 2006 - 04:33 AM Last post by: dbfcs |
|
|