Heya everyone i am new top this forum and it seems to be very helpful. I have recently purchased a L Reg 1993 Hyundai Scoupe MVI and i recieved a quote for a Scoupe MVI of 1070 pounds. When i enter my reg number they quote me 3 grand. So i phone them and ask whats going on and they say its because your car is putting out between 110 and 125 bhp and it is a high performance car. Now i am sure the...

FOR SALE: S-coupe turbo

late 'P' reg - 1996
107K miles
taxed end May 2008
will/should have 12 months MOT in next week or so, time permitting

very shiny red
lowered
standard mechanicals(although have some tuning bits to be included)
non-standard alloys (+original 3-spoke turbo alloys)
full-closure alarm-immobiliser (where windows...

Hi all. I have just joined the forum and plan to introduce myself after posting my question. I am trying to remove the 5 speed gearbox from my coupe and I am struggling to pull it off the engine. I have undone everything all cables, bell housing bolts, mounts etc and have succeded in getting a small gap around the engine/gearbox joint but when I try to apply a small lever to pry it from the block...

Hi,

I want to upgrade my website, which is especially for the Elantra J1, but I want to invite the S-Coupe drivers as well (until 1995).
Would it be possible to send mir informations, pictures aso. about the car? Maybe, you know which parts from the Elantra and S-Coupe are the same?

Don't hesitate to contact me, you'll find my mail address at lantraj1.de

Hello,

Is there a strut brace designed for the S-Coupe?
If not what car will fit with little or no modifications e.g. no cutting/welding of the main bar.

Also is it possible to get wind deflectors for the scoupe? If so who does them?

I've also seen on ebay that there is a Mitsubishi with the same/simlar layout as the scoupe...any idea what it is?

Howzit guys
I got my Scoupes motor redone recently and wanted to know wha tthe best mods would be for my N/A motor. I got an exhaust system and am gonna be putting on a branch and a cone filter soon. Can u guys think of anything else i can do to my Scoupe?

Now ill admit when my buddy got a Hyundai Accent GSI hatch i thought why would you buy this thing its hyundai junk. Well I am gonna admit i changed my views completely i love that Lil car tough as nails and has good power to boot. Now on to my question i just found out about these scoupes and I'm wondering what mods could i do to it..i want a car that i can mod up fairly easy meaning...

hey guys can anyone tell me how to reprogramme the remote on a 1998 hyundai coupe 2.0 se. please its driving me mad

hi again

ive got a 93 scoupe turbo thats start very well then after a few ( 4-6 ) minutes its starts to over fuel (black smoke ) i have cleaned the injectors, replaced AFS, replaced temp sensor,replaced spark plugs and tested everything i can think of please any more ideas would be great


thanks RAY

further to my problems i am after close up pictures of...

hi all, i have just finished fitting a new spoiler on my scoupe, the spoiler came off of a old subaru and has a brake light fitted. i was just wondering if anybody can help me wire it up so it comes on when i press my brakes and not when i turn headlights and backlights on. the spoiler brake light just has a positive and negative comin from it. thanks for your help!!!...

Hi all,

The 1992 S-coupe wont start, floods and chugs really bad , thats if it starts at all

So now having worked out how to fault find using a circuit tester and i get a 3-1-4-5 code

So I then find that it means a Engine coolant temperature (ECT) sensor

Next step.............. Can any one tell me where the Bl**dy thing is ...

Latest Pics, let me know what you guys think.
Snow Boost Water/Methonal Injection
iformation.co.za/scoupe/sbi.jpg' />

2 Stage Hi Boost controller(Built/Designed by Me)
iformation.co.za/scoupe/mbc1.jpg' />

Hi boost activation
...

Hello all,

It's been a while since I last posted.

I have an issue with a loud buzzing sound when my car goes over 3500RPM.

It's coming from just in front of the driving position. AN engineer told me it may be the exhaust heat sheild.

It hasn't affected the performance of my car but is slightly annoying when I push it a bit.

Any...

hi all!! i was driving home from home from work this afternoon and the clutch seemed not right. i went from 1st to 3rd gear and the car revved up like i had half clutch on. the car also didnt go any faster, there was also a like burning smell coming from the engine. the car still drives and i can get the gears fine but its asif the clutch is sticking half on :S:S do i need a new clutch or...

Hi Everyone:
I bought a '95 scoupe in February...it was pretty cheap but safety inspected until the end of May so I knew it was worth the $$. Sadly, a wheel bearing went 2 weeks before safety and there is so much body work needed underneath the mechanic told me it would be very expensive to fix..course with the age I knew other things could pop up...Anyways..I loved driving...

I'm in need for a new head gasket and I need help for taking the head apart. My timing belt is pretty new so it won't be changed. Where should I beging and what should I know? Do I need any special tools? How can I take the timing belt away from the head cam?

And don't say that take your car to the shop. I won't take it. I just have never took head away and I just need a...

Hi all need some HELP quick I lost the key for my hyundai s-coupe 93 does any one know if the boot lock contains the same number of pins as the ignition as I could remove the boot lock and get a key cut, does the key contain a chip, im not worried about the immobilizer as that is a seperate fob, any help would be great default/liebe011.gif'...

Hey all i'm breaking my scoupe all parts are there so email at c_ladbrook@hotmail.com if you want something.

I'm located in Sleaford, Lincolnshire, UK

I also have a rebuilt engine .. bottom end with new piston rings, big end bearings, gaskets, water pump and pre-tensioner and the top end has had new valve stem seals and valves relapped in, engine just needs a head...

i have had my car on the drive for a week, i just went to start it struggled then a black puff of smoke and wobbley, anyone know why?

Hello all.

I treated myself and bought a pair of side repeaters (indicators in the front wings, just behind the front wheels).

They were "universal fit" so I knew I mayu need to modify them to fit.

However the new repater is way too smal to fit the Hyundais bulb holder. So I have a couple of quesions:

1. Should I find a more mainstream car, say...

They all Pushed out 185ml per minute.(185cc's) i was exspecting 225.

Now i have read somewhere that HYUNDAI never released the CC info on the scoupe injector.. but now we know...

Need info on Scoupe Turbo Injectors

hey wasup everybody
i recently bought a santa fe, i quite like it but i had a problem
it started raining and i couldn't see ****! i was trying to find out where the window defroster button is located but i couldn't? does it even have a defroster? if it has where is the button located and what does it look like?
this is some serious stuff...

Dont know if any of you have ever seen this but i have only seen ONE pic in my entire life of a Beta Scoupe(Yes that Maroon Scoupe/engine bay pic) now i stumbled apon this! Scoupe Beta TURBO!!!


memimage.cardomain.net/member_images/12/web/3048000-3048999/3048209_20_full.jpg' />

...

Hello All,

This is the only active forum that I have found that could help me with my issue. To start off my brother bought this car back in 2003, we were told it only had a bad water pump and that it would be a snappy fix, when we got the car home we found out it had a cracked block and the turbo was shot. We got a new block and turbo but my brother decided that it would be a good...

Hi,

So, i'm in need of a new distributor.

Can I put this ( ) for a replacement for my old? Do I still need my old or how this these things work, I'm quite unfamiliar with these.

And what about the phase sensor plug, connecting to my distributor, does pertronix also have it or what?...

So little by little im tryin to get my car back on the road. It runs and everything and sounds like its gunna die.

1. When i drive and i open up the hood there is anti freeze everywhere. Ive been told its probably cracked. But ive also been told that its not that big of a deal. But i think thats one of the major problems i have.

2. When i turn off my car the cooling fan still...

I have a problem with my car, I own a LS model..
i just bought this car last month from a secondhand car dealer.
The car start to have problems.
i have to do inspection by my own so i want to know whether this car has a computer box..

i know the car use electronic control fuel injection so the car must has a computer box right?..where is it?

the problems that...

anyone know if you can still get the wide arch kits, and if so anyone know where?

hey guys does anyone in the uk have a s coupe there breaking i need some parts and cant afford to get them from dealer.

need:
rear heated window switch

bar that connects the two whipper blades together not sure what its called. White thing with 2 bushing on it.

rear middle break light

cheers guys

I have a 93 Turbo without air condiioning, I want to know if its worth my time to put to install one.

I know that Hyundai used to make A/C kits when the car was selling, and I can if I can find a doner car such and an Excel I would be good.

I have been doing research and found that the compressor from a 1989-1993 Toyota corllola, and an Acura integra 1993-1995

Let...

I just recently got my 93 S Coupe turbo running again and decide to put in a bored out throttle body. as soon as I changed it the rpm shot up to 2k. I know it's getting more air now but it used to idle at 1k. I then added a fuel pressure regulator figuring I needed more fuel with the more air I added. but no change. any ideas?

I AN NEW TOO THIS FORUN ,BUT I KEEP TRYING TO FIND THE DEFINITIVE BETA SWAP IN A 85 SCOPE ,I WONT TO KEEP MY 5 SPEED GEARBOX ,BUT BE ABLE TO BOLT UP A EARLY BETA 2.0 ENGINE TO IT. CAN ANYONE IN THE STATES WHO HAS DONE THIS CONVERSION HELP PLEASE

Like the topic said...

What the best Oil and the best SAE for the engine

Thks

hi guys, i have a 1995 scoupe mvi se. what im looking for is to put a turbo onto it, can anybody help me by telling me if at all possinble and if so what it would take? also would my engine handle it? thanks alot, danny

hi, i am looking for a used or new cat for a 1995 scoupe mvi se non turbo, gong to use it as a straight through pipe default/biggrin.gif' 'biggrin.gif' /> also is the cat from a turbo the same from a non turbo ??? thanks alot

Hi guys i am checking to see which 16v head either SOHC or DOHC will fit 4G15 or 4G32 to be placed in MK1 Scoupe

Will this turbo fit the scoupe gt as a turbo upgrade?

Or any turbo from here:

If not, can anyone post some links to stores with turbos to upgrade a stock scoupe gt?
...

default/00000732.gif' '00000732.gif' />

So, after i rebuild my head (valves were ok, so I didn't get them changed) I tryed to start my car; well, it didn't start ( it tried but it goes out allmost immediatelly).
I did compression check and from left to right no.2-4...

heyyy,

i have a few problems i need help with. cheerss.

First of all one day my rear heated window just stopped working. i dunno why. the light doesnt work on the button and it doesnt click in.

2nd of all

the car idles erraticly when i am stop at lights etc. it under revs i dunno why?

and it develops a tapping noise from the engine sometimes,...

hey im a british scoupe owner. About 2 months ago someone hit the front of my car and im waiting for the work to be done its taking forever. i was wondering if anyone knew where i can get a replacment bumper or a body kit for my scoupe>?

cheers guys

Who has used it and will this Work on a Scoupe Turbo(Mine should be pushing near 300hp) as they dont have PG listed Especially for the Scoupe...... But they do for other Hyundai Model's....



Phantom GripPhantom Grip 4 Hyundai's

I was wondering if anyone knows if the suspension in the rear of an X2 excel is the same as a mk1 scoupe? i was looking for a rear sway bar.

I have a 91 Scoupe. No bells or whistles. It is my driving to work car. It has been at the dealer for 2 days. I replaced: plugs wires, fuel filter, dist. cap. With no luck. the dealer said the great on my distributor is worn and the whole assemble needs replaced. I know that I can get a new gear for the distributor but I have no idea if this will be a temp fix or not.

I am...

hello i've just bought an scoupe mvti. the key fob doenst work, iv changed the battery but still nothing. think i need to reset/progamme it again, anyone know how i can do this?

I just thought I'd share. He sent me a comment yesterday about my old scoupe. I had never seen him on there back when I use to search cardomain for scoupes, so I guess he recently joined.

I like the rear bumper he has on it. I'm sure there's probably quite a few body kits over there for the Scoupe.

Later on,
Nick...

I searched ebay a bit and came across different dump valves..
Bailey DV30, DV36, DV26 etc...
Link:
Which one is the best for the T15 and food for future upgrades to a T25/T28?
Also, which one has a nice loud whistle/pshhhhhhh sound (lol)

Another vent-to-atmosphere bov:

Any other recommendations, please post info/link here.....

Hello,

I've been offered a very good nick Nisssan 200sx T25 Turbo for £150.

I know it can bolt straight on once the casting is "rotated" to fit but I have other questions.

1. What differences will this have on the cars perfomance. e.g. Better? Worse? lag? Over Boosting? Gasket Explosion?!

2. Can I bolt this on without any modifications....

Hi guys where can i find a LSD for the scoupe turbo or NA. MK1 or MK2

Just thought i'd say hello.
Looks a good club and good information going round.
I got myself a 95 turbo a few weeks ago and i must say for a small engine it goes like stink !!!
Now as a new Scoupe owner i would like to know a few things but i will only ask one for now. Can anybody tell me what the offset and PDC is on the wheels ?
Thanks
...

Hey whatsup everyone?

I have no idea what this part of the car is called. It got ruined at the failed attempt of putting in new relays/fuses. I do not know much about cars , so bare with me. If i should post more pictures tell me.

Here are pictures of what it looks like.

i222.photobucket.com/albums/dd104/518productions/101_0015.jpg' ...