Hyundai Forums banner

Green hands share DIY front brake service

1K views 2 replies 2 participants last post by  Santa Fe SE 
#1 ·
after 40000km I think I need a front brake pads
so i bought pads, anti-seize, silicone paste ...
when i check the brake pads, all the pads have 7mm
I was surprise 4mm in 40000km,
so i still can use it for another year
because very happy so i try make a post for myself
but guy please don't laugh i take two day to finish it.
(watch youtube (for front brake serive, change rotor and pads), get some information form this forum, where is the lifting point. etc.)
i think next time will be better.:nerd:
 
#3 · (Edited)
from here Hyundai Santa Fe: Front Disc Brake. Repair procedures - Brake System - Brake System - Hyundai Santa Fe DM 2013-2014 Service Manual

Front Brake Pad Check
1.
Check the pad wear. Measure the pad thickness and replace it, if it is less than the specified value.
Pad thickness
Standard value: 11 mm (0.43 in)
Service limit: 2.0 mm (0.0787 in)

I just assume the thickness is 11mm.
I bought the new pads (wagner thermo quiet ceramic QC1432) it only have 10mm.
I will check the brake pads again when I change the tire after winter.
3mm to close to the limit, i think i will change the pads around 4mm.

Thanks!
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top