[GROUP BUY] Sonata YF LED DRL Fogs + Folding Remote Key Fob!!

[markbda1]

Originally Posted by Tech@UNAVi

markbda1 - Your order will ship tomorrow via USPS

thankkkkkks bro

[thepoetvd776]

Originally Posted by thepoetvd776

I'm enjoying my DRLs very much, but now I'm thinking about splicing into the headlights so that they come on when I unlock the doors.

Which wire do I splice it in to? I have a 2012 Sonata YF GLS without Fogs.

Also can I use a quick splice or wire tap to complete the splicing?

Thanks for your all help!

A little help please?

[thepoetvd776]

Uploaded with ImageShack.us
Which set of wires should I tap into?

[markbda1]

Originally Posted by Tech@UNAVi

markbda1 - Your order will ship tomorrow via USPS

Yesterday I got them today... I got them cut. I'm very happy with the quality of the flip key. I bought a cheap one on ebay and its crappy with tonnnnnns of wobble when the key is flipped down. This is 100 times better.

Do you have these for the 12 elantra ?

[Tech@UNAVi]

Originally Posted by markbda1

Yesterday I got them today... I got them cut. I'm very happy with the quality of the flip key. I bought a cheap one on ebay and its crappy with tonnnnnns of wobble when the key is flipped down. This is 100 times better.

Do you have these for the 12 elantra ?

Yes, please check

[GROUP BUY] Folding Remote Key Fob for Elantra MD!!

[thepoetvd776]

Originally Posted by thepoetvd776

Uploaded with ImageShack.us
Which set of wires should I tap into?

bump

[Tech@UNAVi]

Originally Posted by thepoetvd776

bump

Did you receive the install manual?

[Rob@UNAVi]

The best way i found to tap into the headlight assembly was via the parking lights, not the headlights that way you can run them as daytime running lights by simply turning on the parking lights, to do this there are two wires one orange and one yellow in either plug, I dont remember which side is which but you will have a yellow on one side and orange on the other and those are the Positive or 12volt side of the parking lights for either side, please locate prior to hooking up, also use a test light to make sure they are the correct wire. Hook the positive side of the DRL'S onto the correct wire for each side and ground the other side of the DRL, and there you go. Also make sure for protection you fuse both sides. Do this at your own risk, we are not responsible for damage to your vehicle. This advice is given just as a suggestion and in now way assume liability. Use caution when attempting to wire into factory wiring, any damage caused by wiring the DRL'S in yourself is your responsibility and is in no way UNAVI'S fault. PLEASE consult a professional installer if you have any doubts on the wire up.

Rob

Originally Posted by thepoetvd776

bump

[thepoetvd776]

Originally Posted by Rob@UNAVi

The best way i found to tap into the headlight assembly was via the parking lights, not the headlights that way you can run them as daytime running lights by simply turning on the parking lights, to do this there are two wires one orange and one yellow in either plug, I dont remember which side is which but you will have a yellow on one side and orange on the other and those are the Positive or 12volt side of the parking lights for either side, please locate prior to hooking up, also use a test light to make sure they are the correct wire. Hook the positive side of the DRL'S onto the correct wire for each side and ground the other side of the DRL, and there you go. Also make sure for protection you fuse both sides. Do this at your own risk, we are not responsible for damage to your vehicle. This advice is given just as a suggestion and in now way assume liability. Use caution when attempting to wire into factory wiring, any damage caused by wiring the DRL'S in yourself is your responsibility and is in no way UNAVI'S fault. PLEASE consult a professional installer if you have any doubts on the wire up.

Rob

Thanks for the clarification!

[Rob@UNAVi]

If you have any questions let me know, there are several ways to wire these depending on how you like them to work and if your good with a soldering iron it is very simple. Just let me know if i can help in any way. Thanks
Rob